Sectional steel water tanks are a series of modular panels bolted together on site to give an infinite range of sizes and capacities. They are particularly functional in confined spaces, and can be easily transported to remote areas conveniently packed. They play a vital role in combating drought conditions in the developing countries and rural areas.
Hot Dip Galvanized Steel water tank is made of galvanized steel panel, it is one kind of SMC water tank too, the material of the water tank panel is galvanized steel. It is suitable for drinking water, living water, fire water and Industrial water storage facilities, etc.
Advantages: light weight, no corrosion, no leakage, good water quality, wide application range, long service life, good thermal insulation performance, beautiful appearance, convenient installation, convenient cleaning and maintenance, and strong adaptability
Galvanized steel water tank is assembled by galvanized steel water tank panel, sealing materials, metal structure and pipe system. The size of galvanized steel water tank panel as follows:
1000x1000mm, 1000x500mm, 500x500mm
the thinckness or the panel as follows:
2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm etc.
The water tank can be assembled with the size 0.125m³~2,000m³, depend on your requirement.
Packing: pallet or carton, it is convenient to load them into containers by forklift.
Galvanized steel water tank installation instruction:
1.The concrete foundation should be same level and the height should more than 500mm for checking.
2.Put the channel base on the concrete foundation, and ensure that the channel base is horizontal.
3.Assemble the bottom panel, ensure the connection method between panel and panel as follows: bolt--gasket--panel--rubber strip--another panel--gasket-nut, then tightening the bolt.
4.Assemble the side panel, ensure the connection method as same as the above-metioned. If reinforcement is required, the side panels need to be added auxiliary angle iron.
5.When we assemble the panel which has 45º slant bolt holes, we must loose three nuts of two side panels, then tighten 45º slant bolts, and then tighten the two side of loosing bolts.
6.Assemble the plugging, push out the plugging and add sealing gasket, angle iron, gasket and nut, then tighten the nut, glass glue.
7.Assemble the lacing bar, ensure that the lacing bar is not too tight or too loose.
8.Assemble the top cover panel.
9.Assemble the flange, ensure sealing well.
10.Assemble the ladder, ensure it is nearby the manhole.